Expanded Diagnostics; General Causes Of Errors - Leuze electronic AMS 348i Manual

IO1 LSR
IO2 TMP
ERR
Pos. current: --------
Pos. min.:
Pos. max.:
Use the up/down buttons
contents of the scrollable pages are intended solely for Leuze for internal evaluation.
The diagnostics have no influence on the communication to the host interface and can be
activated during operation of the AMS 348i.

10.1.3 Expanded diagnostics

The Expanded diagnostics menu item is used for Leuze-internal evaluation.
10.2

General causes of errors

LINK LED for BUS IN and BUS OUT
A green/orange multicolor LED below the BUS IN and BUS OUT connectors indicates the
EtherNet/PROFINET connection status.
ACT0
LINK LED for BUS IN
Green continuous light
Orange flashing
Leuze electronic
PLB

ATT
--------
--------
LNK0
Diagnostics and troubleshooting
to scroll in the bottom half between various displays. The
Power LINK green
- The link exists, the hardware connection to the next
connected participant is OK. The LED signals the
same status as "LNK0" and "LNK1" in the display.
LINK LED flashing orange (ACT0/ACT1)
- Data is exchanged with the connected participants.
AMS 348i
ACT1 LNK1
LINK LED for BUS OUT
94