Leuze electronic AMS 348i Manual page 61

9.8.4.7 Step 3 – Hardware configuration of the S7 PLC: Configuration
The AMS 348i
device name.
Figure 9.8:
Double-clicking the participant opens the properties window. Here you can assign a unique
device name that exists only once in the network. If desired, an IP address can be assigned
manually (not mandatory). As the assignment of the device name takes place in offline mode,
unique assignment must take place between the MAC ID of the installed device and the
device name assigned in offline mode during the further course of configuration, see also
step 5.
Figure 9.9:
Leuze electronic
is activated by "Drag and Drop" and receives the IP address and a unique
Insert AMS 348 into the project
Assign unique device name in the properties window
AMS 348i
PROFINET interface
58