Leuze electronic AMS 348i Manual page 64

PROFINET interface
 Mark the desired MAC address to which you wish to assign a device name.
Figure 9.14: Select desired device (MAC address)
Notice!
The Simatic Manager offers the possibility of having the found and marked participant
(marking of the MAC ID in the Simatic Manager) flash/wave. The mounting location of the
participant in the system can then be uniquely assigned to the MAC ID. The marked MAC ID

"waves".
During flashing/waving, the Power LED and BUS LED of the AMS
The found MAC ID is "linked" to the device name assigned in the hardware configurator.
Please be sure to pay attention that the names are the same and that the installed device
is correctly assigned to the hardware configuration. This is particularly important if identical
devices are installed several times in the same system.
61 AMS 348i
348i flash orange.
Leuze electronic