Profinet Interface; General Information On Profinet; Identification & Maintenance Functions - Leuze electronic AMS 348i Manual

9

PROFINET interface

9.1

General information on PROFINET

The AMS 348i
supports a transmission rate of up to 100 Mbit/s (100Base TX/FX), full duplex, as well as
auto-negotiation and auto-crossover.
The functionality of the device is defined via parameter sets which are organized in modules.
The modules form part of the GSD file.
Each AMS
to an IP address during the course of configuration. In the Simatic Manager for creation of
PROFINET networks, the IP address is also linked to a freely selectable device name which
may only exist once in the network (see chapter 9.8.4.7 "Step 3 – Hardware configuration
of the S7 PLC: Configuration").
9.2 Identification & Maintenance Functions
The AMS 348i
Contents
Header
MANUFACTURER_ID
ORDER_ID
SERIAL_NUMBER
HARDWARE_REVISION
SOFTWARE_REVISION
REVISION_COUNTER
PROFILE_ID
PROFILE_SPECIFIC_TYPE
IM_VERSION
IM_SUPPORTED
Table 9.1:
Leuze electronic
is designed as a PROFINET-RT (Real Time) device (acc. to IEEE 802.3). It
348i has a unique MAC-ID which is described on the name plate. This is linked
supports the base record I&M0:
Index
0
10
12
32
48
50
54
56
58
60
62
Base record I&M0
Data type Description
10 bytes Manufacturer specific
UNSIGNED16 Leuze manufacturer ID
ASCII string 20 bytes Leuze order no.
ASCII string 16 bytes Unique device serial number
Hardware revision number, e.g.,
UNSIGNED16
"0...65535"
Software version number, e.g.
1xCHAR, 3xUNSIGNED8
V130 correspond to "V1.3.0"
Is incremented when updating
UNSIGNED16 individual modules. This function
is not supported.
PROFINET application profile
UNSIGNED16
number
Info about subchannels and
UNSIGNED16
submodules. Not relevant
2xUNSIGNED8 Implemented I&M version V 1.1 0x01,0x01
Bit[16] Optional I&M records available
AMS 348i
PROFINET interface
Value
-
338
-
Device-
dependent
Device-
dependent
Device-
dependent
0
0xF600 (Generic
Device)
0x01,0x01
0
50