Leuze electronic AMS 348i Manual page 34

Reflectors
Notice!
The reflector must be angled. To do this, use the spacer sleeves. Angle the reflectors so that
the surface reflections of the foil seal are deflected to the left, right or upwards. Avoid
a downward pitch, as additional reflections may occur on the running rails. chapter 6.4.3
gives the correct pitch with respect to the reflector size and, thus, the length of the spacers.
Reflective tapes ...-S and ...-M
Figure 6.3:
Figure 6.4:
31
Reflector mounting
Pitch 1 °
Spacer sleeves
Pitch of the reflector
Direct reflection from the
triad structure
Deflected surface reflection due to
the pitch of the reflective tape
AMS 348i
Pitch 1 °
Leuze electronic