Mounting The Ams 348 - Leuze electronic AMS 348i Manual

Installation and mounting
If you have any questions concerning your shipment, please contact your supplier or your
local Leuze electronic sales office.
 Observe the applicable local regulations when disposing of the packaging materials.
5.2 Mounting the AMS
Figure 5.2:
The AMS 348i
plane-parallel, flat walls or system parts. For error-free position measurement, there must
be an unobstructed line-of-sight connection between the AMS
Use M 5 screws to fasten the laser measurement system. Secure the screws with a toothed
lock washer to protect against loosening caused by vibrations.
17
348i
Mounting the device
and the corresponding reflector are mounted on two mutually opposing,
B
AMS 348i
A M 5 screw for
A
aignment
B Knurled nut and
WAF 4 nut for
securing
C Optical axis
A
C
348i and the reflector.
Leuze electronic