Language Selection Menu; Service Menu - Leuze electronic AMS 348i Manual

Display and control panel AMS 348i
Other submenu
Table 8.5:
Level 3
Heating control
Display
illumination
Display contrast
Service RS232
8.3.3

Language selection menu

Language selection
o Deutsch
English
o Español
o Français
o Italiano
There are 5 display languages available:
• German
• English
• Spanish
• French
• Italian
The AMS 348i
Notice!
When operating the AMS
is used in the display.
To change the language, no password needs to be entered nor must password enabling
be activated. The display language is a passive operational control and is, thus, not a
function parameter, per se.
47
Other submenu
Level 4 Level 5 Selection/configuration option
Description
Standard (10° C ... 15° C)/Extended (30° C ... 35° )
Defines a switch-on/switch-off range for the heating control.
The extended switch-on/switch-off range for heating may provide relief
in the event of condensation problems.
There is no guarantee that no condensation will occur on the optics in the
extended switch-on/switch-off range due to the limited heating capacity.
This parameter is available as standard, but functions only for devices
with integrated heating (AMS 348 ... H).
10 minutes/ON
Display illumination is switched off after 10 minutes or, if the parameter
is set to "ON", illumination is always on.
Weak/Medium/Strong
The display contrast may change at extreme temperature values. The
contrast can subsequently be adapted using the three levels.
Baud rate 57.6 kbit/s / 115.2 kbit/s
The service interface is only available to Leuze internally.
Format 8,e,1 / 8,n,1
The service interface is only available to Leuze internally.
is delivered from the factory with the display preset to English.
348i on the PROFINET, the language configured in the GSD file
AMS 348i
Standard
Standard
10 min.
Medium
115.2 kbit/s
8,n,1
Leuze electronic