Specifications And Requirements; Specifications; Pc Requirements - Banner iVu Plus BCR Gen2 Series Instruction Manual

iVu Plus BCR Gen2 Series Sensor

3 Specifications and Requirements

3.1 Specifications

Power Connection
12-pin M12/Euro-style male connector; accessory cable
required for operation
USB 2.0 Host
4-pin M8/Pico female connector; optional USB cable required
for operation of USB flash drive
Ethernet Connection
4-pin M8/Pico male connector
Remote Display Connection
8-pin M12/Euro-style female connector; accessory cable
required for remote display
Power Requirements
Voltage: 10 V dc to 30 V dc
Current: 1 A maximum (exclusive of I/O load)
Output Configuration
NPN or PNP, software selectable
Demo Mode
Full tool functionality on canned images
Sensor Lock
Optional password protection
Integrated Ring Light
Models with red, blue, green, infrared, white, ultraviolet or no
integrated ring light
Output Rating
150 mA
Acquisition
60 fps (frames per second) 5

3.2 PC Requirements

Operating System
operating system version 7, 8, or 10 6
® ®
Microsoft Windows
System Type
32-bit, 64-bit
Hard Drive Space
80 MB (plus up to 280 MB for Microsoft .NET 4.5, if not already
installed)
Memory (RAM)
512 MB minimum, 1 GB+ recommended
Important: Administrative rights are required to install the Vision Manager software.
5 This value can vary based on inspection settings.
6 Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
12
Exposure Time
0.1 ms to 1.049 s
Imager
1/3 inch CMOS 752 × 480 pixels; adjustable Field of View (FOV)
Lens Mount
Micro Video Lens models: M12 × 1 mm thread; micro video lens
4.3 mm, 6 mm, 8 mm, 12 mm, 16 mm, 25 mm
C-Mount models: Standard C-mount (1 inch-32 UN)
Construction
Black PBT sensor housing; die cast zinc back cover; acrylic
window
Integrated Display Weight: 0.36 kg (0.80 lbs)
Remote Display Weight: 0.41 kg (0.90 lbs)
Vibration and Mechanical Shock
Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz,
0.5 mm amplitude, 5 minutes sweep, 30 minutes dwell)
Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms
duration, half sine wave)
Environmental Rating
IEC IP67, micro video lens models only
Operating Conditions
Integrated Display Stable Ambient Temperature: 0 °C to +45 °C
(+32 °F to +113 °F)
Remote Display Stable Ambient Temperature: 0 °C to +40 °C
(+32 °F to +104 °F)
Certifications
Processor
1 GHz minimum, 2 GHz+ recommended
Screen Resolution
1024 × 768 full color minimum, 1650 × 1050 full color recommended
Third-Party Software
Microsoft .NET 4.5, PDF Viewer (such as Adobe Acrobat)
USB Port
USB 3.0, recommended if a USB to Ethernet adapter used to
communicate with the sensor
www.bannerengineering.com - Tel: + 1 888 373 6767