Sensor Maintenance - Banner iVu Plus BCR Gen2 Series Instruction Manual

To remove a group and all the sensors within the group, click the
Network Adapters Tab
Use the Network Adapters tab on Sensor Neighborhood to view the network adapters that the system searches to find
sensors.
Navigate: Home > Sensor Neighborhood > Network Adapters.
Network adapter information including Link Status (connected/not connected), Adapter name, IP Address, and Subnet
Mask is also available.

5.2.2 Sensor Maintenance

Use Sensor Maintenance on the
Sensor Maintenance includes sensor information such as sensor Status, Sensor Name, IP address, MAC address, Model
number, Firmware Version, and which sensors are tagged as favorites.
Actions include update firmware
available through Vision Manager. See
Note: A firmware update requires a cable and a USB flash drive. See
198).
Figure 15. Network Adapters Tab
Home screen to view or change device properties.
Figure 16. Sensor Maintenance Tab
and view or change some sensor settings
Save to USB (p. 54).
www.bannerengineering.com - Tel: + 1 888 373 6767
iVu Plus BCR Gen2 Series Sensor
across from the group name.
. Backup or restore sensor data
Update the iVu BCR Firmware
is not
(p.
25