Using Ivu Gen1 And Gen2 Devices In The Same Application - Banner iVu Plus BCR Gen2 Series Instruction Manual

iVu Plus BCR Gen2 Series Sensor
All measurements are listed in millimeters [inches], unless noted otherwise.
3.4 Using iVu Gen1 and Gen2 Devices in the Same
Application
Generation 1 and Generation 2 iVu devices can be used in the same application, however steps must be taken to ensure
compatibility. Gen2 output files, such as configuration and log files, are not compatible with Gen1 devices. In order to have
one configuration file that applies to both Gen1 and Gen2 devices, configure inspections using a Gen1 device or the Gen1
Emulator. Settings from Gen1 are automatically converted to Gen2 when they are loaded onto a Gen2 device. Confirm all
inspections after loading to ensure that they are correct.
Note: New features available on Gen2 devices will not be available when creating the inspection on Gen1
software.
16
C-Mount Lens Covers
Figure 5. C-Mount Lens, Integrated Display Models
www.bannerengineering.com - Tel: + 1 888 373 6767