Industrial Ethernet; Command Channel - Banner iVu Plus BCR Gen2 Series Instruction Manual

Port Status
Main Menu > System > Communications > Serial I/O > Status
Use the Port Status screen to make sure that data is entering and exiting the device. This can be useful for debugging
issues such as improper wiring, mismatched baud rates, or other serial I/O issues.

11.5.3 Industrial Ethernet

Main Menu > System > Communications > Industrial Ethernet
The iVu BCR device can be controlled or monitored over Industrial Ethernet using Ethernet/IP
®
PROFINET protocols. This document will help you to set up the iVu BCR in the desired configuration and provide you with
information you will need to connect to the master device (PLC, HMI, etc.).
Connection
Main Menu > System > Communications > Industrial Ethernet > Connection
Use the Connection to enable Ethernet/IP, PROFINET, Modbus or or PCCC protocols on the Industrial Ethernet channel.
Select Disable to completely disable the Industrial Ethernet channel.
Status
Main Menu > System > Communications > Industrial Ethernet > Status
The Status screen displays information about the current connection. This information is protocol specific.
View Logs
Main Menu > System > Communications > Industrial Ethernet > View Logs
The View Logs screen displays the list of recent events on Industrial Ethernet channel. When troubleshooting, select
detailed logs under Setup.

11.5.4 Command Channel

Main Menu > System > Communications > Command Channel
Figure 41. Serial I/O Screen
Figure 42. Port Status Screen
www.bannerengineering.com - Tel: + 1 888 373 6767
iVu Plus BCR Gen2 Series Sensor
™
, Modbus/TCP, PCCC, or
57