Configuration Instructions - Banner iVu Plus BCR Gen2 Series Instruction Manual

iVu Plus BCR Gen2 Series Sensor
Table 53: Text Response 64-byte Submodule (Ident 0x00052)
PLC Input Data Name
Flag indicating when to Command ACK
Numeric Command Status
16-bit integer command response
32-bit integer command response
Floating-point command argument
Length-of-Command/Response string
64-character command response string
Flag Indicating When to Command ACK
Bit Position for Cyclic Input
Data
Bit 0
Bit 15
Table 54: Text Response 128-byte Submodule (Ident 0x00053)
PLC Input Data Name
Flag indicating when to Command ACK
Numeric Command Status
16-bit integer command response
32-bit integer command response
Floating-point command argument
Length-of-Command/Response string
128-character command response string
Flag Indicating When to Command ACK
Bit Position for Cyclic Input
Data
Bit 0
Bit 15

14.7.3 Configuration Instructions

Using Siemens TIA Portal (v13) Software
Installing the Banner iVu BCR GSD File
Use these instructions to install the Banner iVu BCR GSD file in the Siemens TIA Portal (v13) software. Use these
instructions as a basis for installing the Banner iVu BCR GSD file in another controller (PLC).
1. Download the Banner iVu BCR GSD file from
144
Input Data Type
Unsigned16
Unsigned16
Unsigned16
Unsigned32
Float32
Unsigned32
64-byte OctetString
Function
Command Channel Command
Acceptance Acknowledgement
Command Execution Error
Input Data Type
Unsigned16
Unsigned16
Unsigned16
Unsigned32
Float32
Unsigned32
128-byte
OctetString
Function
Command Channel Command
Acceptance Acknowledgement
Command Execution Error
www.bannerengineering.com
www.bannerengineering.com - Tel: + 1 888 373 6767
PLC Output Data Name
Not applicable
PLC Output Data Name
Not applicable
.
Output Data Type
Not applicable
Output Data Type
Not applicable