Setting Up For Data Compare - Banner iVu Plus BCR Gen2 Series Instruction Manual

• Any case where data does not compare is marked with a solid red bounding box. If the barcode is marked with a
dotted red bounding box, this indicates a checksum error or quiet zone violation.
• Any barcodes in the field of view that the sensor does not detect (for example, because they are not one of the
barcode types selected), are unmarked.

6.3 Setting up for Data Compare

This section describes how to set up the data compare feature. For this example, the reference data is from a previously
decoded barcode.
1. Go to Main Menu > Inspection > Barcode > Data Compare > Compare and enable data compare.
2. Go to the Main Menu > Inspection > Barcode > Data Compare > Set Data, and click Show last read data.
3. Click Yes.
4. Click to return to the Home screen.
www.bannerengineering.com - Tel: + 1 888 373 6767
iVu Plus BCR Gen2 Series Sensor
31