Specifications - Banner Q3XTBLD150-Q8 Instruction Manual

Q3X Laser Contrast Sensor

4 Specifications

Sensing Beam
Visible red Class 2 laser, 655 nm
Supply Voltage (Vcc)
10 to 30 V dc
Power and Current, exclusive of load
Supply Power: < 675 mW
Current consumption: < 28 mA at 24 V dc
Supply Protection Circuitry
Protected against reverse polarity and transient overvoltages
Repeatability
60 µs
Delay at Power Up
1 s
Maximum Torque
Side mounting: 1 N·m (9 in·lbs)
Nose mounting: 10 N·m (88 in·lbs)
Connector
5-pin M12 Euro-Style Integral Connector
Input Wire
Allowable Input Voltage Range: 0 to Vcc
Active Low (internal weak pullup—sinking current): Low State < 2.0 V at 1 mA
max.
Output Configuration
Bipolar (1 PNP & 1 NPN) output
Output Rating
Discrete Output: 100 mA maximum (protected against continuous overload and
short circuit)
Off-state Leakage Current: < 10 µA
NPN On-state saturation voltage: < 200 mV at 10 mA and < 1.0 V at 100 mA
PNP On-state saturation voltage: < 1 V at 10 mA and < 2.0 V at 100 mA
Ambient Light Immunity
> 5000 lux
Response Speed
User selectable:
• —250 microseconds
• —1 millisecond
• —5 milliseconds
Operating Conditions
Temperature: −10 °C to +50 °C (+14 °F to +122 °F)
Humidity: 35% to 95% relative humidity
Environmental Rating
IEC IP67 per IEC60529
IEC IP68 per IEC60529
IEC IP69K per DIN40050-9
22
Sensing Range
Table 8: Sensing Range
Model
Q3XTBLD-Q8
Q3XTBLD50-Q8
Q3XTBLD100-Q8
Q3XTBLD150-Q8
Q3XTBLD200-Q8
Construction
Housing: Nickel-plated zinc die-cast
Side cover: Nickel-plated aluminum
Lens cover: Scratch-resistant PMMA acrylic
Lightpipes and display window: Polysulfone
Adjustment buttons: 316 stainless steel
Beam Spot Size
y
Table 9: Models LD, LD100, LD150, LD200
X
Y
Table 10: Model LD50
Vibration
MIL-STD-202G, Method 201A (10 Hz to 60 Hz, 0.06 inch (1.52 mm) double
amplitude, 2 hours each along X, Y and Z axes), with sensor operating
Shock
MIL-STD-202G, Method 213B, Condition I (100G 6x along X, Y and Z axes, 18
total shocks), with sensor operating
Storage Temperature
–25 °C to +75 °C (−13 °F to +167 °F)
www.bannerengineering.com - Tel: 763.544.3164
Contrast Sensing Range
0 to 300 mm (11.81 in)
0 to 50 mm (1.97 in)
0 to 100 mm (3.94 in)
0 to 150 mm (5.91 in)
0 to 200 mm (7.87 in)
Beam
Spot
Pattern
x
Distance
20 mm 50 mm 100 150
mm mm
5.9 mm 5.6 mm 5.1 mm 4.6 mm
2.3 mm 2.1 mm 1.9 mm 1.6 mm
20 mm
X 4.8 mm
Y 2.0 mm
Background Suppression
Distance
Not Applicable
60 mm (2.36 in)
120 mm (4.72 in)
190 mm (7.48 in)
280 mm (11.02 in)
200 300
mm mm
4.1 mm 3.0 mm
1.5 mm 1.2 mm
Distance
50 mm
3.4 mm
1.4 mm