Rslogix5000 Configuration - Banner iVu Plus BCR Gen2 Series Instruction Manual

iVu Plus BCR Gen2 Series Sensor
The connection looks like the one in

14.4.8 RSLogix5000 Configuration

To create an implicit Class 1 configuration to the iVu BCR using EtherNet/IP when using a ControlLogix family PLC,
configure the iVu BCR as a "Generic Ethernet Module" under the ENET_MODULE. The following is a sample setup of a
Banner device:
1. Add a generic Ethernet module to the PLC's Ethernet card.
a. Click New Module.
b. Click Communications, then Generic Ethernet Module.
112
Figure 101. Download to the PLC
Figure 101
(p. 112).
Figure 102. Add Ethernet Module
www.bannerengineering.com - Tel: + 1 888 373 6767