Ivu Plus Barcode Reader (Bcr) Gen2 Series Sensor Eds File Installation In Controllogix Software - Banner iVu Plus BCR Gen2 Series Instruction Manual

14.4.7 iVu Plus Barcode Reader (BCR) Gen2 Series Sensor EDS File
Installation in ControlLogix Software
Use the EDS Hardware Installation Tool to register the Electronic Data Sheet (EDS) file.
1. On the Tools menu, click EDS Hardware Installation Tool.
The Rockwell Automation's EDS Wizard dialog displays.
2. Click Next.
3. Select the Register an EDS file(s) option.
4. Browse to locate the EDS file and click Next.
Figure 90. Tools—EDS Hardware Installation Tool
Figure 91. Rockwell Automation's EDS Wizard—Options
www.bannerengineering.com - Tel: + 1 888 373 6767
iVu Plus BCR Gen2 Series Sensor
107