Introduction - GE Moisture Image 1 Series Service Manual

Introduction

Troubleshooting and Maintenance
The Moisture Image Series 1 is designed to be maintenance and
trouble free; however, because of process conditions and other
factors, minor problems may occur. Some of the most common
problems and procedures are discussed in this section. If you cannot
find the information you need in this section, please consult GE
Panametrics.
Do not attempt to troubleshoot the Series 1 beyond the
instructions in this section. If you do, you may damage
the unit and void the warranty.
This section includes the following information:
•
Testing the Alarm Relays
•
Testing the Recorder Outputs
•
Trimming Recorder Outputs
•
Screen Messages
•
Common Problems
•
Checking and Replenishing the Electrolyte in the Delta F Oxygen
Cell
•
Adding or Removing a PCMCIA Card
•
Installing a Channel Card
•
Replacing and Recalibrating the Moisture Probes
•
Recalibrating the Pressure Sensors
•
Calibrating the Delta F Oxygen Cell
•
Background Gas Correction Factors for the Delta F Oxygen Cell
•
Range, Signal, and Calibration Error Descriptions
Caution!
June 2003
2-1