Toshiba 4560 Service Manual page 121

9.4.2 Discharge lamp
(1) Remove the rear cover (U).
(2) Disconnect the connector.
(3) Hold the leading edge of the PC board and pull
it to the rear.
Note: When reassembling, insert the PC board
firmly until it touches the bracket.
9.4.3 LED eraser array
(1) Remove the process unit and the rear cover
(U).
(2) Disconnect the connector.
(3) Remove one screw and pull it to the front.
Nov. 1997 © TOSHIBA
LED eraser array connector
Discharge lamp
9 - 7
Discharge lamp connector
LED eraser array
4560/4570 DRUM