Toshiba 4560 Service Manual page 326

18.13.6 Drive motor
(1) Loosen the one screw holding the timing belt
tensioner
(2) Disconnect the one connector of the motor.
Note: Do not remove the spring hooked on
the belt tensioner.
(3) Remove the two screws holding the motor.
Note: Whenever reinstalling, secure the belt
tensioner after all the parts.
18.13.7 Electromagnetic clutch
(1) Remove one harness band, one spring and
three screws.
Note: One of the three screws is shorter
(M3 4)
B
4560/4570 RADF
.
Drive motor
Band
18 - 68
Connector
Spring
Nov. 1997 © TOSHIBA
B