12 FUSER UNIT/PAPER-EXIT UNIT
12.1 General Description
Cleaning felt roller
Separation claw
Upper exit roller
Lower exit roller
Exit paper guide
Heat and pressure are applied to the transfer paper which has been separated from the drum, and the
toner image is fixed there. The transfer paper which has completed the fixing process exits onto the
receiving tray through the paper exit unit.
The fuser unit comprises the heater lamp, heat roller, pressure roller, separation claws, cleaning felt
roller, cleaning roller, thermistor, thermostat, etc. The paper exit unit consists of exit rollers, exit paper
guide, etc.
Nov. 1997 © TOSHIBA
Heater lamp
Heat roller
Separation claw
12 - 1
Cleaning roller
Pressure roller
Fuser cover
Thermistor
Thermostat
Entrance paper guide
Pressure spring
4560/4570 FUSER