Toshiba 4560 Service Manual page 152

(5) Pull out the drum shaft from the rear after let down
the drum shaft stopper lever.
Drum shaft stopper lever
(6) When removing the drum from the cleaner unit,
hold the side of the drum as shown (in the dia-
gram), and slowly take it out.
Note: When reinstalling the drum in the cleaner
unit, the drive gear should be installed to
the rear.
11.4.2 Main blade
(1) Remove the main charger.
(2) Remove the spring.
(3) Remove the 2 screws.
When reassembling, secure with the screws in
the following order:
1 2
Nov. 1997 © TOSHIBA
Drum shaft
Drum
Gear
Main blade
2
Spring
11 - 5
Drum shaft
1
4560/4570 CLEANER