Toshiba 4560 Service Manual page 161

12.5 Disassembly and Replacement
12.5.1 Fuser unit
(1) Remove the used toner bag and door switch
cover (1 screw each).
(2) Remove the 2 connectors on the front side.
(3) Remove the 1 screw which secures the fuser
unit.
Note: Use the original hole (round) when secur-
ing it again.
(4) Slide the entire unit to the front side, unhook
the stud from the copier frame and remove it.
12.5.2 Heater lamp
(1) Remove the fuser unit.
(2) Remove the fuser cover (2 screws).
Nov. 1997 © TOSHIBA 12 - 7
Connector
Fuser cover
4560/4570 FUSER