[A] Aligning roller (upper, lower)
(1) Remove the aligning guide (2 screws).
(2) Remove the brackets on the front and rear (4
screws).
(3) Remove the aligning pressure spring.
(4) Remove the bushes (upper, lower, 2 each).
(5) Lift up the aligning rollers (upper and lower) to
remove them.
4560/4570 FEEDER
Aligning roller (U)
Aligning roller (U)
Aligning pressure spring
Bush (U)
Bush (L)
Pressure spring
Bush (U)
Bush (L)
8 - 12
Pre-aligning guide
[Front side]
Aligning roller (U)
Aligning roller (L)
[Rear side]
Nov. 1997 © TOSHIBA