Toshiba 4560 Service Manual page 180

(2) Remove the stop-ring securing the open guide
stopper.
Take out the open guide stopper from the open
guide (lower) while pushing it toward the rear.
(3) To remove the open guide units (upper and
lower), remove the stop-ring (rear) and the snap
pin (front and rear, 1 each), push the units to-
ward the rear to have the front stud disengaged,
and then take out the units toward the front.
Nov. 1997 © TOSHIBA
Open guide (lower)
Stop-ring
Rear side
Front side
Stop-ring
Rear side
13 - 13
Open guide stopper
Stud
Open guide unit
(upper and lower)
4560/4570 ADU