Toshiba 4560 Service Manual page 23

2.4 Removal of Covers and PC
Boards
2.4.1 Removal of covers
[A] Front cover
(1) Open the front cover.
(2) Remove the pins on the hinges at both ends
(1 each).
[B] Upper rear cover
(1) Remove 4 screws.
[C] Lower rear cover
(1) Remove the upper 3 screws.
(2) Loosen the lower 2 screws.
[D] Upper feed cover
(1) Open the front cover and the bypass tray and
then remove 2 screws.
[E] Feed cover (left and right)
(1) Remove the paper feed cover.
(2) When removing the left feed cover, open the
front cover.
(3) Remove the screws (2 on each side).
4560/4570 GENERAL
Upper
feed
cover
Left
feed
cover
Right feed cover
2 - 16
Front cover
Upper rear cover
Lower
rear
cover
Loosen
Nov. 1997 © TOSHIBA