Toshiba 4560 Service Manual page 188

[C] Gate solenoid
(1) Remove the gate cover and motor cover by un-
screwing each screw.
(2) Disconnect the gate solenoid connector and take
out the gate unit by removing two screws.
(3) Remove the gate solenoid by unscrewing two
screws.
[D] Side motor and end motor
(1) Place the ADU upside down.
(2) Remove the lower cover by unscrewing 7
screws.
(3) Unscrew two screws, take out the timing belt,
and remove the side motor bracket.
(4) The end motor can be removed by the same
procedure.
Nov. 1997 © TOSHIBA
Gate solenoid
Side motor
bracket
End motor
bracket
13 - 21
Gate solenoid
Arm
Spring
Timing belt
Timing belt
4560/4570 ADU