No.
Message
16
CALL FOR SERV-
ICE
17
TIME FOR PERI-
ODIC MAINTE-
NANCE CALL FOR
SERVICE
Nov. 1997 © TOSHIBA
Copier status
This message is displayed if a
motor, sensor or switch, etc., does
not function correctly.
PM cycle display
• This message is displayed when
the copier is ready for periodic
maintenance.
• Copies can be made.
Fig. 2.2-3
5 - 5
Notes
Turn off the power switch, correct the
cause of the problem and then turn
on the power again.
Have the service center carry out pe-
riodic maintenanace.
4560/4570 DISPLAY