Toshiba 4560 Service Manual page 91

7.7.17 Lens/mirror switch
(1) Disconnect the connector. Remove the lens/
mirror drive unit (2 screws).
(2) Disconnect the connector. Remove the lens/
mirror switch with its bracket (2 screws).
(3) Remove the hook. Disconnect the 2 connec-
tors. Remove the lens/mirror switch.
7.7.18 Carriage 2
(1) Remove carriage 1. Remove the automatic
exposure sensor PC board unit.
(2) Remove the lens/mirror drive unit.
(3) Set the wire holder jig (Large) to the wire drive
pulley on the front and rear.
Nov. 1997 © TOSHIBA
Connector
Lens/mirror switch
Wire drive pulley (front side)
Wire holder jig
(Large)
Wire drive pulley (rear side)
7 - 29
Connector
Connector
Wire holder jig
(Large)
4560/4570 OPTICAL