10.3.6
Auto toner sensor
(1) Discharge the developer material.
(2) Reverse the developer unit and remove the har-
ness cover (3 screws).
(3) Remove the toner sensor (1 connector, 1 screw).
Replace the sensor.
10.3.7
Magnetic roller
(1) Discharge the developer material.
(2) Remove the toner holder, nozzle, plate and guide
roller.
(3) Remove the leveler (2 screws).
(4) Remove the sleeve drive pulley.
Nov. 1997 © TOSHIBA
10 - 11
Harness cover
Connector
Auto toner sensor
Leveler
Sleeve drive pulley
4560/4570 DEVELOPER