(5) Remove the bushing from the rear end of the
stack/feed roller shaft, and the stop-ring and
pick-up roller guide at the rear.
(6) After removing the front stop-ring, move the
roller and the entire guide toward the front and
remove the pin.
(7) From the rear, take out the sub-stack/feed roller,
pick-up roller guide, pin and main stack/feed
roller, pick-up roller guide, pin and sub-stack/
feed roller in this order.
[E] ADU separation roller
(1) Remove the two screws of the ADU separation
roller.
Nov. 1997 © TOSHIBA
ADU stack/feed roller
Pick-up roller guide
Stop-ring
Pin Stack/feed roller (sub)
Bush
ADU separation roller
13 - 17
Bush
Stop-ring
Stack/feed roller (main)
4560/4570 ADU