[B] Side switch
(1) Remove the ADU feed unit.
(2) Remove the ADU motor bracket.
(3) Disconnect the connector.
(4) Remove the guide switch bracket from the ADU
motor bracket by unscrewing a screw.
(5) Unlatch the claws of the switch.
[C] End switch
(1) Remove the upper paper guide and the open
guide units (upper and lower).
(2) Place the ADU upside down and remove the
lower cover.
(3) Remove the rail guide.
Nov. 1997 © TOSHIBA
Side switch bracket
13 - 23
ADU motor bracket
Side switch
Rail guide
4560/4570 ADU