(5) When 3 screws (1 earth wire) are removed, the
reversing unit can be taken out.
Note: When reinstalling, temporarily secure
the reversing unit, after having mounted
the transport unit, fix the reversing unit.
18.13.16 Exit cover
(1) Remove the reversing unit.
(2) Take out two screws (front and rear) and re-
move the cover.
18.13.17 Reversing roller
(1) Remove the reversing unit.
(2) Remove the bracket of the drive section (2
screws).
Nov. 1997 © TOSHIBA
18 - 73
Reversing unit
Exit cover
Bracket
4560/4570 RADF