Toshiba 4560 Service Manual page 127

Notes: 1. Pay attention to the direction of the spring
hanger on rear.
2. Ensure that the charge wires are firmly
inserted in V-slots at the front and rear.
3. The wire must not be kinked.
4. Do not touch the wire directly with your
hand.
5. Insert the supporter securely into the
hook or slot.
[B] Replacing the cleaning pad:
(1) Remove the charge wire.
(2) Remove the rear terminal.
(3) Move the cleaning pad to the rear side.
(4) Remove the pad holder snap from the shaft.
Notes: 1. When reassembling, pay attention to the
direction in which the pad holder faces.
2. When moved to the rear, the pads (2 pcs.)
should be clearly away from the wires.
Nov. 1997 © TOSHIBA
Cleaning pad
9 - 13
Spring hanger
Pad holder
[Rear side]
Charge wire
Cleaning pad
4560/4570 DRUM