Toshiba 4560 Service Manual page 124

Notes: 1. Pay attention to the direction of the spring
hanger on the front.
2. Insert it fully in the V-groove on the front
and rear.
3. The wire must not be kinked.
4. Do not touch the wire directly with your
hands.
5. It is easy to replace the charger wire
when the rear side terminal is put on the
holder charger.
[C] Replacing the cleaning pad:
(1) Remove the charge wire.
(2) Remove the rear terminal.
(3) Move the cleaning pad to the rear side.
(4) Remove the pad holder snap from the shaft.
4560/4570 DRUM
Spring hanger
Holder charger
Cleaning pad
9 - 10
Terminal base
Pad holder
[Rear side]
Nov. 1997 © TOSHIBA