Commissioning
Prerequisites during op-
9.3
eration
After operation
9.4
82
───
• Pay attention to atypical noise development
• Pay attention to smoke development
• Always check drive surfaces, cables and seals for dirt, leaks,
moisture or dust
• Check temperature development
• Observe recommended maintenance intervals
• Check function of safety devices
WARNING
Ensure safe condition of the machine / system
Make sure that all movers come completely to a standstill.
If the controller enable is canceled or the 48 V power supply is
switched off, movers on a vertical section can move uncontrol-
lably and cause serious injuries.
eXtended Transport System
Version: 1.0