During Operation; After Operation - Beckhoff XTS Operating Instructions Manual

For your safety

2.1.2 During operation

2.1.3 After operation

16 ───
Do not use damaged components
Observe the specifications in the technical data during storage,
transport and operation. Do not use damaged components.
Check safety pictograms
Check whether the designated pictograms are on the product. Re-
place missing or illegible stickers.
Observe tightening torques
Install connections and components in compliance with the specified
tightening torques and check them regularly.
Earth electrical components or modules correctly
Do not touch electrical components or modules unless you are
wearing protective ESD clothing. Only walk on conductive floors.
Only use original packaging for further processing
When shipping, transporting, storing and packing, use the original
packaging or conductive materials.
Observe the GND concept
Special conditions need to be observed for the grounding of the
XTS. In every case, read the chapter: Grounding of the power sup-
ply.
Do not work on live electrical parts
Ensure that the protective conductor is connected properly. Never
disconnect electrical connections while they are live. Only work on
the XTS when the voltage has dropped to < 10 V. Disconnect all
components from the mains and secure against reconnection.
Do not touch hot surfaces
Check cooling of the surfaces with a thermometer. Do not touch the
components during operation. Allow the components to cool down
for at least 15 minutes after switching off.
Avoid overheating
Operate the components according to the technical specifications.
Refer here to the chapter: "Technical data". Provide for adequate
cooling and switch the components off immediately if the tempera-
ture is too high.
Do not touch any moving or rotating components
Do not touch any moving or rotating components. Fasten all parts or
components on the machine or plant.
De-energize and switch off components before working on
them
Carry out a voltage test and check all safety-relevant devices for
functionality. Secure the working environment and the control cabi-
net against inadvertent power-up. See chapter: Decommissioning.
XTS Starter Kit with NCT Functionality Version: 1.4