Beckhoff XTS Hygienic Operating Instructions Manual page 69

1
1
2
3
4
Version: 1.0
► Place rail on support 1 on the module
► Tighten screws with sealing rings 1 hand tight to fix the rail on
support
WARNING
Risk of crushing due to strong magnetic attraction
When mounting the movers on the rails, always hold them tight
with both hands. The magnetic plate set of the mover and the
modules strongly attract one another magnetically.
If you do not hold the movers tight with both hands in a controlled
manner, the magnetic forces can attract the movers in an uncon-
trolled manner to the XTS Hygienic and cause serious crushing
injuries to the hands and fingers or damage to the system.
► For the alignment, note that encoder magnet 2 and LED status
display 4 are on the same side of the system when railing-on
► Position mover 1 with encoder magnet 2 centrally over the rail on
support 3
eXtended Transport System
Mechanical installation
─── 69