Guide Rails - Beckhoff XTS Hygienic Operating Instructions Manual

Mechanical installation

Guide rails

7.5
Straight guide rails
7.5.1
1
3
1
3
1
2
5
4
60 ───
Lock for mounting movers
A 250 mm-long guide rail serves as a lock for mounting the movers
on the guide rails. For the assembly, the lock should be replaced
by a rail on support.
Further information is given in the course of the mechanical instal-
lation in the chapter Mover.
7.5.1
► Always use guide rail 2 with lock 1 at the top on the assembled
2
system 3
► Insert locating pins 1, 2 and 3 in all straight modules and both
curved modules
2
► Insert locating pins 2 and 4 into the guide rail 3
► Push seal 1 with the pre-cut edge 5 downwards onto the locating
pins
3
eXtended Transport System Version: 1.0