Beckhoff XTS Hygienic Operating Instructions Manual page 64

Mechanical installation
1
4
2
1
1
3
64 ───
► Guide seal 2 around the curved module 3 from top to bottom
► Press seal into the groove between curved module and curved
2
rail 1 and 4 with your fingernail
► Guide the seal on the other side of the system around the curved
module in the same way
3
► Press seal 1 into the groove 2 between guide rail and the
straight modules with your fingernail
► To facilitate mounting, lift or move the guide rail slightly
► Continue pressing the seal in up to the end of the guide rail
► Mount the seal on the other side of the system in the same way
► Screw in the screws 1 of the guide rail hand tight in order to fix
the seals 2 on both sides of the system
► Grease seals 2 between guide rail and curved rail 1 and 3 on
both sides of the system with Vaseline
2
eXtended Transport System Version: 1.0