Beckhoff XTS Hygienic Operating Instructions Manual page 67

Completion of the assembly
1
Version: 1.0
► Screw all screws in the machine bed tight
► Observe tightening torques:
Components
Screws, M5 x 20
► Screw all screws on the guide rails of the entire system tight
► Observe tightening torques:
Components
Screws, M4 x 45
► Screw all screws on the electrical interfaces of the entire system
tight
► Observe tightening torques:
Components
Screws, M4 x 12
► Cut off the overhanging part of the seal 1 flush to the rail with a
cutting tool
A scalpel or a hobby knife, for example, is a suitable cutting tool.
► a scalpel or hobby knife
► Cut all further seals to length in the same way
eXtended Transport System
Mechanical installation
Tightening torque [Nm]
8
Tightening torque [Nm]
6
Tightening torque [Nm]
3
─── 67