Table of Contents
Advertisement
Mechanical installation
Technical aids
7.1.1
Modules
7.2
1
50
───
For the mechanical installation you need the following aids:
• Suitable torque wrench
• Suitable screwdrivers
• Cutting tool such as scalpel or hobby knife
• Adhesive: Elastosil E43 N
• Vaseline with brush
• Lint-free cloth
7.2
► Insert locating pin 1 in the curved module
1
► Position curved module 1 with the locating pin in the bore in the
machine bed 2
1
2
► Screw in the screws with sealing ring 3, leaving only a minimal
gap
3
► Insert locating pin 1 in the module
eXtended Transport System
Version: 1.0
Advertisement
Table of Contents
