Beckhoff XTS Hygienic Operating Instructions Manual page 54

Mechanical installation
1
1
1
1
2
54 ───
► Press the short end of the seal 1 into the corners 2 on the curved
module with your fingernail, then mount the straight part of the
seal in the same way
► To facilitate mounting, lift or move the modules slightly
2
► Mount the short end of seal 1 on the other side of the curved
module 2 in the same way
2
► Screw in the screws 2 of the curved module hand tight in order
to fix the seals 1 on both sides
2
► Press the long end of the seal 2 into the corners 3 on the curved
module with your fingernail, then mount the short part of the seal
between the corners in the same way
► To facilitate mounting, lift or move the modules slightly
► Leave the long legs 1 of the seal hanging down. Make sure that
the seal does not get dirty on the floor
3
eXtended Transport System Version: 1.0