Seals - Beckhoff XTS Hygienic Operating Instructions Manual

Mechanical installation

Seals

7.3
1
2
1
1
1
52 ───
7.3
► Grease the gap 2 between modules 1 and 3 with Vaseline
3
► Push seal 1 between the modules, folding the seal end 2 to the
side
► Carefully brush the upper part of the seal downwards with a little
pressure
2
► Fold the seal end 2 back and carefully push it into the groove be-
tween the machine bed and the modules
► Following the assembly, brush seal 1 downwards until it overlaps
at the electrical interface 2
► Remove the surplus Vaseline with a lint-free cloth
► Mount all further seals between the modules in the same way
2
► Grease all O-ring contours 1 of the seal 2 for the electrical inter-
face with Vaseline
2
eXtended Transport System Version: 1.0