Commissioning
Prerequisites during oper-
9.3
ation
After operation
9.4
136
───
• Pay attention to atypical noise development
• Pay attention to smoke development
• Always check drive surfaces and cables for dirt, leaks, moisture
or dust
• Check temperature development
• Observe recommended maintenance intervals
• Check function of safety devices
WARNING
Ensure safe condition of the machine / system
Make sure that all movers come completely to a standstill.
If the controller enable is canceled or the 48 V power supply is
switched off, movers on a vertical section can move uncontrol-
lably and cause serious injuries.
XTS
Version: 3.1