Beckhoff XTS Hygienic Operating Instructions Manual page 49

Number Name
1 Straight modules
2 Straight guide rails with lock
3 Straight guide rails without lock
4 Curved modules
5 Curved rails
6 Rail on support
7 Guard plate for rail on support
8 Stainless steel mover 75 mm, depending on application
9 Aluminum steel mover 75 mm, depending on application
10 Cover with connection card
11 Cover with supply
12 Seals for covers
13 Seals between modules
14 Seals between rails
15 Seals between modules and rails
16 Seals between machine bed and modules, short end
17 Seals between machine bed and modules, long end
18 Locating pins 5 x 14 for modules and rails
19 Locating pins 4 x 24 for seals between modules
20 Short locating pins 5 x 24, outside between straight guide rails and curved rails
21 Long locating pins 5 x 50, inside between straight guide rails and curved rails
22 Screws M5 x 20 with sealing ring for machine bed
23 Screws M4 x 45 with sealing ring for rails
24 Countersunk screws M3 x 6 for locating pins in seals between modules
25 Screws M4 x 12 with sealing ring for covers
26 Set screw M4 x 20 for rail on support
27 Contact washer
Version: 1.0 eXtended Transport System
Mechanical installation
─── 49