Beckhoff XTS Hygienic Operating Instructions Manual page 15

After operation
2.1.3
Version: 1.0
Avoid overheating
Operate the components according to the technical specifications.
Refer here to the chapter: "Technical data". Provide for adequate
cooling and switch the components off immediately if the tempera-
ture is too high.
Do not touch moving or rotating components
Do not touch moving or rotating parts during operation. Ensure that
all parts / components on the machine / plant are firmly seated.
De-energize and switch off components before working on
them
Carry out a voltage test and check all safety-relevant devices for
functionality. Secure the working environment and the control cabi-
net against inadvertent power-up. See chapter: "Decommissioning".
eXtended Transport System
For your safety
─── 15