Mechanical Installation - Beckhoff XTS Hygienic Operating Instructions Manual

Mechanical installation

46 ───
WARNING
Wear safety shoes
Wear safety shoes when assembling the XTS Hygienic, as com-
ponents may inadvertently fall down in the working area.
Falling components can lead to serious injuries to the feet.
Handle cutting tools carefully
Use cutting tools with great care. Make sure that nobody in your
immediate vicinity can be injured if the tool inadvertently slips.
Wear protective gloves if necessary.
Careless handling of tools can lead to puncture wounds and cut-
ting injuries.
Handle adhesives with care
Be careful when using adhesives. Observe the manufacturer's
documentation. Wear protective gloves and safety glasses if nec-
essary.
Adhesive can irritate the eyes, the respiratory organs and the
skin. Do not inhale the vapor. Avoid contact of the adhesive with
the eyes and skin. If adhesive should get into your eyes, immedi-
ately rinse out your eyes thoroughly with water and consult a doc-
tor.
Establish a conductive connection between the module and
the machine bed
Establish a conductive connection between every module and the
machine bed with the help of a contact washer on the tapped hole
with the marking "functional earth".
Non-earthed modules can cause a short-circuit and damage the
system.
1
When screwing the screw with seal 1 into the tapped hole with the
marking "functional earth" 3, use a contact washer 2 between the
machine bed and the seal.
eXtended Transport System
3
2
Version: 1.0