Compact Flash (Cf) Card Installation And Removal - Pro-face PS-4700 Series User Manual

Hardware Modifications

Compact Flash (CF) Card Installation and Removal

Preparing to Use a CF Card
Inserting the CF Card
80
The Industrial Personal Computer operating system views the CF Card as a hard
disk. Proper handling and care of the CF Card helps extend the life of the Card.
Familiarize yourself with the Card prior to attempting insertion or removal of the
Card.
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
Remove all power from the device before removing any covers or elements of

the system, and prior to installing or removing any accessories, hardware, or
cables.
Unplug the power cable from both the Industrial Personal Computer and the

power supply.
Always use a properly rated voltage sensing device to confirm power is off.

Replace and secure all covers or elements of the system before applying power

to the unit.
Use only 24 Vdc when operating the Industrial Personal Computer.

Failure to follow these instructions will result in death or serious injury.
COMPACT FLASH CARD DAMAGE AND DATA LOSS
Remove all power before making any contact with an installed CF Card.

Use only CF Cards manufactured by Pro-face. The performance of the

Industrial Personal Computer has not been tested using CF Cards from other
manufacturers.
Confirm that the CF Card is correctly oriented before insertion.

Do not bend, drop, or strike the CF Card.

Do not touch the CF Card connectors.

Do not disassemble or modify the CF Card.

Keep the CF Card dry.

Failure to follow these instructions can result in injury or equipment damage.
The procedure below describes how to insert the CF Card.
Step Action
1 Shut down Windows® in an orderly fashion and remove all power from the
device.
2 Insert the CF Card firmly into the CF Card slot, and check that the eject button
pops out.
DANGER
CAUTION