Usb Holder For Usb (Mini-B) - Pro-face GP4104G1D Hardware Manual

Installation and Wiring

USB Holder for USB (mini-B)

Introduction
Attaching the USB Holder
Removing the USB Holder
160
When using a USB device, you can attach a USB holder to the USB (mini-B)
interface to prevent the USB cable from being disconnected.
RISK OF EXPLOSION IN HAZARDOUS LOCATIONS
Confirm that the USB cable has been attached with the USB holder before using
the USB interface.
Remove power before attaching or detaching any connectors to or from the unit.
Failure to follow these instructions can result in death, serious injury, or
equipment damage.
Step Action
1 Insert the USB cable into the USB (mini-B) interface.
(1)
1 USB cable
2 Attach the USB holder to fix the USB cable in place. Insert the USB holder into
the USB (mini-B) interface.
(2)
(1)
1 USB holder
2 USB cable
Remove the USB holder by pressing the tabs from the sides.
WARNING