Mechanical Installation; Preparation - Beckhoff AX8000 Series Operating Instructions Manual

Mechanical installation

Preparation

8.1
50 ───
8
WARNING
Establish the voltage-free and de-energized condition
Remove all fuses in the supply network and turn off the main
switch on the control cabinet. Secure the control cabinet against
being switched on again.
Although a motor is no longer rotating, voltage on the control and
power connections or a residual voltage in the capacitors of the
servo drive can lead to serious injuries.
Mount servo drives vertically and with sufficient ventilation
Observe the permissible data for operation and environment as
well as the notes in this chapter.
Inadequate ventilation and incorrect installation can lead to dam-
age to the servo drive and its components due to heat develop-
ment.
Note that when dimensioning the control cabinet you may have to
mount input filters, mains chokes and brake resistors for your appli-
cation. Allow sufficient space in the control cabinet for these compo-
nents so that cooling air circulation is ensured.
AX8000 Version: 1.1